1984 MG Montego tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1984 MG Montego.

1984 MG Montego tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1984 – 1991 Europe market 1 trim

68 hp · 1.3L I4 165x R13 85S 7 fitments

GenerationI 1984–1991

Power68 hp

Engine1.3L I4, Petrol

Center bore57.1 mm

PCD4x95.25

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165x R13 85S	13x5 ET28 ~~4x95.25~~	23	Tires Rims
175/80 R13 84S	13x5 ET48 ~~4x95.25~~	23	Tires Rims
185/75 R13 85T	13x5.5 ET48 ~~4x95.25~~	25	Tires Rims
185/65 R14 84T	14x5.5 ET48 ~~4x95.25~~	26	Tires Rims
195/65 R14 84T	14x6 ET28 ~~4x95.25~~	26	Tires Rims
185/55 R15 83H	15x6 ET48 ~~4x95.25~~	29	Tires Rims
205/55 R15 83V	15x6.5 ET25 ~~4x95.25~~	29	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.