Skip to content

2020 MG Ruiteng tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2020 MG Ruiteng.

2020 MG Ruiteng tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2020

Open a trim for its factory package and every alternative size, front and rear.

MG Ruiteng Facelift

2017 – 2021 2 trims

Ruiteng 1.5TGI

166 hp · 1.5L SGE (15S4E) I4 215/60 R17 96H 3 fitments
GenerationFacelift 2017–2021
Power166 hp
Engine1.5L SGE (15S4E) I4, Petrol
Center bore57.1 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/60 R17 96H17x6.5 ET41 5x11233TiresRims
215/65 R16 98H16x6.5 ET41 5x11233TiresRims
235/50 R18 97V18x7.5 ET41 5x11233TiresRims

Ruiteng 2.0TGI

217 hp · 2.0L MGE (20L4E) I4 235/50 R18 97V 3 fitments
GenerationFacelift 2017–2021
Power217 hp
Engine2.0L MGE (20L4E) I4, Petrol
Center bore57.1 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/50 R18 97V18x7.5 ET41 5x11233TiresRims
215/60 R17 96H17x6.5 ET41 5x11233TiresRims
235/45 R19 95V19x7.5 ET41 5x11236TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.