Skip to content

2003 MG TF tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2003 MG TF.

2003 MG TF tire sizes

Bolt pattern
Fitment tables

4 trims sold in 2003

Open a trim for its factory package and every alternative size, front and rear.

MG TF TF

2002 – 2011 Europe market 4 trims

TF 1.6i

114 hp · 1.6L 16K4F I4 185/55 R15 82V / 205/50 R15 86V 2 fitments
GenerationTF 2002–2011
Power114 hp
Engine1.6L 16K4F I4, Petrol
Center bore56.6 mm
PCD4x95.25
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front185/55 R15 82V15x6 ET28 4x95.2526TiresRims
Rear205/50 R15 86V15x6 ET28 4x95.2536TiresRims
Front195/45 R16 80W16x7 ET28 4x95.2526TiresRims
Rear215/40 R16 86W16x7 ET28 4x95.2536TiresRims

TF 1.8i

118 hp · 1.8L 18K4F I4 185/55 R15 82V / 205/50 R15 86V 2 fitments
GenerationTF 2002–2011
Power118 hp
Engine1.8L 18K4F I4, Petrol
Center bore56.6 mm
PCD4x95.25
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front185/55 R15 82V15x6 ET28 4x95.2526TiresRims
Rear205/50 R15 86V15x6 ET28 4x95.2536TiresRims
Front195/45 R16 80W16x7 ET28 4x95.2526TiresRims
Rear215/40 R16 86W16x7 ET28 4x95.2536TiresRims

TF 1.8i

134 hp · 1.8L 18K4F I4 185/55 R15 82V 2 fitments
GenerationTF 2002–2011
Power134 hp
Engine1.8L 18K4F I4, Petrol
Center bore56.6 mm
PCD4x95.25
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/55 R15 82V15x6 ET28 4x95.252.5TiresRims
195/45 R16 80W16x7 ET28 4x95.252.5TiresRims

TF 1.8i

158 hp · 1.8L 18K4K I4 195/45 R16 80W 1 fitment
GenerationTF 2002–2011
Power158 hp
Engine1.8L 18K4K I4, Petrol
Center bore56.6 mm
PCD4x95.25
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/45 R16 80W16x7 ET28 4x95.252.5TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.