Skip to content

2002 MG ZS tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2002 MG ZS.

Fitment tables

3 trims sold in 2002

Open a trim for its factory package and every alternative size, front and rear.

MG ZS I

2001 – 2005 Europe market 3 trims

ZS 1.8i

115 hp · 18 K4F I4 205/50 R16 89H 3 fitments
GenerationI 2001–2005
Power115 hp
Engine18 K4F I4, Petrol
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/50 R16 89H16x6.5 ET45 4x10030TiresRims
205/45 R17 87V17x7 ET45 4x10033TiresRims
205/40 R18 87V18x7 ET42 4x10033TiresRims

ZS 2.0TDI

111 hp · 2.0L 20T2N I4 205/50 R16 89H 3 fitments
GenerationI 2001–2005
Power111 hp
Engine2.0L 20T2N I4, Diesel
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/50 R16 89H16x6.5 ET45 4x10030TiresRims
215/50 R16 88V16x7 ET45 4x10030TiresRims
215/45 R17 87V17x7 ET42 4x10033TiresRims

ZS 2.5i

174 hp · 25 K4F V6 205/50 R16 89V 4 fitments
GenerationI 2001–2005
Power174 hp
Engine25 K4F V6, Petrol
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/50 R16 89V16x7 ET45 4x10030TiresRims
225/45 R16 87V16x7.5 ET42 4x10033TiresRims
215/45 R17 87V17x7 ET42 4x10033TiresRims
235/35 ZR18 85Z18x8 ET38 4x10036TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.