Skip to content

2024 MG ZX tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2024 MG ZX.

Bolt pattern
Fitment tables

2 trims sold in 2024

Open a trim for its factory package and every alternative size, front and rear.

MG ZX ZX

2021 – 2027 2 trims

ZX 1.3T

153 hp · 1.3 L I4 Petrol 1.3 L I4 215/55 R17 4 fitments
GenerationZX 2021–2027
MarketLatin America
Power153 hp
Engine1.3 L I4 Petrol 1.3 L I4, Petrol
Center bore56.1 mm
PCD5x100
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE215/55 R1717x7 ET41 5x10033TiresRims
Alt215/60 R1616x6.5 ET41 5x10033TiresRims
Alt215/50 R1818x7 ET41 5x10035TiresRims
Alt235/45 R1818x7.5 ET40 5x10035TiresRims

ZX 1.5i

111 hp · 1.5 L 15S4C I4 Petrol 1.5 L 15S4C I4 215/55 R17 4 fitments
GenerationZX 2021–2027
MarketLatin America
Power111 hp
Engine1.5 L 15S4C I4 Petrol 1.5 L 15S4C I4, Petrol
Center bore56.1 mm
PCD5x100
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE215/55 R1717x7 ET41 5x10033TiresRims
Alt205/60 R1616x6.5 ET41 5x10033TiresRims
Alt215/60 R1616x6.5 ET41 5x10033TiresRims
Alt215/50 R1818x7 ET41 5x10035TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.