2009 MINI Convertible tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2009 MINI Convertible.

2009 MINI Convertible tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2009 – 2015 USA market 3 trims

118 hp · N16 B16 A I4 175/65 R15 84T 6 fitments

GenerationII 2009–2015

Power118 hp

EngineN16 B16 A I4, Petrol

Center bore56.1 mm

PCD4x100

ThreadM14 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/65 R15 84T	15x5.5 ET45 ~~4x100~~	35	Tires Rims
175/65 R15 84H	15x5.5 ET45 ~~4x100~~	35	Tires Rims
175/60 R16 82H	16x5.5 ET45 ~~4x100~~	35	Tires Rims
195/55 R16 87H	16x6.5 ET48 ~~4x100~~	35	Tires Rims
195/55 R16 87V	16x6.5 ET48 ~~4x100~~	35	Tires Rims
205/45 R17 84V	17x7 ET48 ~~4x100~~	35	Tires Rims

172 hp · N18 B16 A I4 175/60 R16 82H 5 fitments

GenerationII 2009–2015

Power172 hp

EngineN18 B16 A I4, Petrol

Center bore56.1 mm

PCD4x100

ThreadM14 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/60 R16 82H	16x5.5 ET45 ~~4x100~~	39	Tires Rims
195/55 R16 87V	16x6.5 ET48 ~~4x100~~	35	Tires Rims
195/55 R16 87H	16x6.5 ET48 ~~4x100~~	35	Tires Rims
205/45 R17 84V	17x7 ET48 ~~4x100~~	39	Tires Rims
205/40 ZR18 82W	18x7 ET52 ~~4x100~~	39	Tires Rims

208 hp · 1.6L N14 B16 C I4 185/50 R17 86H 4 fitments

GenerationII 2009–2015

Power208 hp

Engine1.6L N14 B16 C I4, Petrol

Center bore56.1 mm

PCD4x100

ThreadM14 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/50 R17 86H	17x5.5 ET42 ~~4x100~~	38	Tires Rims
205/45 ZR17 84W	17x7 ET48 ~~4x100~~	38	Tires Rims
205/45 R17 84V	17x7 ET48 ~~4x100~~	38	Tires Rims
205/40 ZR18 82W	18x7 ET52 ~~4x100~~	41	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.