Skip to content

1997 MINI Cooper tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1997 MINI Cooper.

1997 MINI Cooper tire sizes

Bolt pattern
Fitment tables

3 trims sold in 1997

Open a trim for its factory package and every alternative size, front and rear.

MINI Cooper ADO20 Mk2

1996 – 2000 Europe market 3 trims

Cooper Cooper

62 hp · I4 145/70 SR12 3 fitments
GenerationADO20 Mk2 1996–2000
Power62 hp
EngineI4, Petrol
Center bore56.5 mm
PCD4x101.6
Thread3/8" - 24 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
145/70 SR1212x4.5 ET14 4x101.6TiresRims
165/60 SR1212x5 ET14 4x101.6TiresRims
175/50 SR1313x6 ET0 4x101.6TiresRims

Cooper Cooper S

85 hp · I4 165/60 SR12 3 fitments
GenerationADO20 Mk2 1996–2000
Power85 hp
EngineI4, Petrol
Center bore56.5 mm
PCD4x101.6
Thread3/8" - 24 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
165/60 SR1212x5 ET14 4x101.6TiresRims
165/60 SR1212x6 ET0 4x101.6TiresRims
175/50 SR1313x6 ET0 4x101.6TiresRims

Cooper Cooper Si

80 hp · I4 145/70 SR12 3 fitments
GenerationADO20 Mk2 1996–2000
Power80 hp
EngineI4, Petrol
Center bore56.5 mm
PCD4x101.6
Thread3/8" - 24 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
145/70 SR1212x4.5 ET14 4x101.6TiresRims
165/60 SR1212x5 ET14 4x101.6TiresRims
175/50 SR1313x6 ET0 4x101.6TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.