Skip to content

2007 MINI Hardtop tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2007 MINI Hardtop.

2007 MINI Hardtop tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2007

Open a trim for its factory package and every alternative size, front and rear.

MINI Hardtop II

2007 – 2014 USA market 2 trims

Hardtop Cooper

118 hp · N12 B16 A I4 175/65 R15 84T 6 fitments
GenerationII 2007–2014
Power118 hp
EngineN12 B16 A I4, Petrol
Center bore56.1 mm
PCD4x100
ThreadM14 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R15 84T15x5.5 ET45 4x10033TiresRims
175/65 R15 84H15x5.5 ET45 4x10033TiresRims
175/60 R16 82H16x5.5 ET45 4x10033TiresRims
195/55 R16 87H16x6.5 ET48 4x10033TiresRims
205/45 R17 84V17x7 ET48 4x10033TiresRims
205/40 R18 82V18x7 ET52 4x10033TiresRims

Hardtop Cooper S

172 hp · N14 B16 A N14 B16 AB I4 175/60 R16 82H 6 fitments
GenerationII 2007–2014
Power172 hp
EngineN14 B16 A N14 B16 AB I4, Petrol
Center bore56.1 mm
PCD4x100
ThreadM14 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
175/60 R16 82H16x5.5 ET45 4x10038TiresRims
195/55 R16 87V16x6.5 ET48 4x10033TiresRims
195/55 R16 87V16x6.5 ET48 4x10033TiresRims
195/55 R16 87H16x6.5 ET48 4x10033TiresRims
205/45 R17 84V17x7 ET48 4x10036TiresRims
205/40 ZR18 82W18x7 ET52 4x10038TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.