1993 Mitsubishi 3000 GT tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1993 Mitsubishi 3000 GT.

1993 Mitsubishi 3000 GT tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1990 – 2001 USA market 3 trims

220 hp · 3.0L 6G72 V6 225/55 R16 93V 4 fitments

GenerationZ16/Z15 1990–2001

MarketUSA

Power220 hp

Engine3.0L 6G72 V6, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/55 R16 93V	16x8 ET46 ~~5x114.3~~	2	Tires Rims
225/50 R17 94V	17x8 ET46 ~~5x114.3~~	2	Tires Rims
235/45 R17 94V	17x8 ET46 ~~5x114.3~~	2	Tires Rims
245/45 R17 95W	17x8.5 ET46 ~~5x114.3~~	2	Tires Rims

296 hp · 3.0L 6G72 V6 225/50 R17 94V 4 fitments

GenerationZ16/Z15 1990–2001

MarketUSA

Power296 hp

Engine3.0L 6G72 V6, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/50 R17 94V	17x8 ET46 ~~5x114.3~~	2	Tires Rims
245/45 R17 95W	17x8.5 ET46 ~~5x114.3~~	2	Tires Rims
225/45 R18 92V	18x8 ET46 ~~5x114.3~~	2	Tires Rims
245/40 R18 93W	18x8.5 ET46 ~~5x114.3~~	2	Tires Rims

282 hp · 3.0L 6G72 V6 225/50 R17 94V 4 fitments

GenerationZ16/Z15 1990–2001

MarketEurope

Power282 hp

Engine3.0L 6G72 V6, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/50 R17 94V	17x8 ET46 ~~5x114.3~~	2	Tires Rims
245/45 R17 95W	17x8.5 ET46 ~~5x114.3~~	2	Tires Rims
225/45 R18 92V	18x8 ET46 ~~5x114.3~~	2	Tires Rims
245/40 R18 93W	18x8.5 ET46 ~~5x114.3~~	2	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.