Skip to content

2005 Mitsubishi Airtrek tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2005 Mitsubishi Airtrek.

2005 Mitsubishi Airtrek tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2005

Open a trim for its factory package and every alternative size, front and rear.

Mitsubishi Airtrek CU

2001 – 2005 Japan market 2 trims

Airtrek 2.0T (TA-CU2W)

237 hp · I4 215/60 R16 93H 4 fitments
GenerationCU 2001–2005
Power237 hp
EngineI4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/60 R16 93H16x6 ET46 5x114.330TiresRims
225/50 ZR17 92W17x7 ET46 5x114.333TiresRims
235/50 ZR17 92W17x7.5 ET46 5x114.333TiresRims
235/45 ZR18 91W18x8 ET38 5x114.333TiresRims

Airtrek 2.4i (UA-CU5W)

158 hp · I4 215/60 R16 93H 3 fitments
GenerationCU 2001–2005
Power158 hp
EngineI4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/60 R16 93H16x6 ET46 5x114.330TiresRims
215/55 R17 93V17x6.5 ET46 5x114.330TiresRims
225/50 R17 92V17x7 ET46 5x114.333TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.