2012 Mitsubishi Challenger tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2012 Mitsubishi Challenger.

2012 Mitsubishi Challenger tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2008 – 2015 Australia market 1 trim

176 hp · I4 235/80 R16 109S 5 fitments

GenerationPB 2008–2015

Power176 hp

EngineI4, Diesel

Center bore67.1 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/80 R16 109S	16x7 ET38 ~~6x139.7~~	2.2	Tires Rims
265/70 R16 112S	16x7 ET38 ~~6x139.7~~	2.2	Tires Rims
265/65 R17 112S	17x7.5 ET38 ~~6x139.7~~	2.2	Tires Rims
265/60 R18 110S	18x7.5 ET38 ~~6x139.7~~	2.2	Tires Rims
265/55 R19 109V	19x8 ET35 ~~6x139.7~~	2.4	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.