1990 Mitsubishi Chariot tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1990 Mitsubishi Chariot.

1990 Mitsubishi Chariot tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1988 – 1991 Japan market 3 trims

84 hp · G37B I4 165x SR13 3 fitments

GenerationD0 1988–1991

Power84 hp

EngineG37B I4, Petrol

Center bore67.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165x SR13	13x5.5 ET46 ~~4x114.3~~	29	Tires Rims
185/70 SR13	13x5.5 ET46 ~~4x114.3~~	29	Tires Rims
195/60 SR14	14x6 ET46 ~~4x114.3~~	32	Tires Rims

75 hp · 4D56 I4 165x SR13 3 fitments

GenerationD0 1988–1991

Power75 hp

Engine4D56 I4, Diesel

Center bore67.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165x SR13	13x5.5 ET46 ~~4x114.3~~	29	Tires Rims
185/70 SR13	13x5.5 ET46 ~~4x114.3~~	29	Tires Rims
195/60 SR14	14x6 ET46 ~~4x114.3~~	32	Tires Rims

93 hp · G63B I4 165x SR13 3 fitments

GenerationD0 1988–1991

Power93 hp

EngineG63B I4, Petrol

Center bore67.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165x SR13	13x5.5 ET46 ~~4x114.3~~	29	Tires Rims
185/70 SR14	14x5.5 ET46 ~~4x114.3~~	29	Tires Rims
195/60 SR14	14x6 ET46 ~~4x114.3~~	32	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.