Skip to content

1998 Mitsubishi Colt tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1998 Mitsubishi Colt.

1998 Mitsubishi Colt tire sizes

Bolt pattern
Fitment tables

4 trims sold in 1998

Open a trim for its factory package and every alternative size, front and rear.

Mitsubishi Colt CJ

1996 – 2003 Europe market 4 trims

Colt 1.3i

74 hp · 1.3L 4G13 I4 175/70 SR13 3 fitments
GenerationCJ 1996–2003
Power74 hp
Engine1.3L 4G13 I4, Petrol
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 SR1313x5 ET46 4x10029TiresRims
175/65 SR1414x5.5 ET46 4x10032TiresRims
185/55 HR1515x6 ET46 4x10032TiresRims

Colt 1.5i

93 hp · 4G91 I4 175/70 SR13 3 fitments
GenerationCJ 1996–2003
Power93 hp
Engine4G91 I4, Petrol
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 SR1313x5 ET46 4x10029TiresRims
175/65 SR1414x5.5 ET46 4x10032TiresRims
185/55 HR1515x6 ET46 4x10032TiresRims

Colt 1.6i

89 hp · 1.6L 4G92 I4 175/70 SR13 3 fitments
GenerationCJ 1996–2003
Power89 hp
Engine1.6L 4G92 I4, Petrol
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 SR1313x5 ET46 4x10029TiresRims
175/65 SR1414x5.5 ET46 4x10032TiresRims
185/55 HR1515x6 ET46 4x10032TiresRims

Colt 1.8i

109 hp · 4G93 I4 175/65 SR14 3 fitments
GenerationCJ 1996–2003
Power109 hp
Engine4G93 I4, Petrol
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 SR1414x5.5 ET46 4x10032TiresRims
185/55 HR1515x5.5 ET46 4x10032TiresRims
195/50 HR1515x6 ET46 4x10032TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.