Skip to content

1997 Mitsubishi Delica Star Wagon tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1997 Mitsubishi Delica Star Wagon.

1997 Mitsubishi Delica Star Wagon tire sizes

Bolt patterns
Fitment tables

3 trims sold in 1997

Open a trim for its factory package and every alternative size, front and rear.

Mitsubishi Delica Star Wagon L300

1989 – 1999 Japan market 3 trims

Delica Star Wagon 2.5D (KD-P05W)

84 hp · 4D56 I4 185x SR14 4 fitments
GenerationL300 1989–1999
Power84 hp
Engine4D56 I4, Diesel
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185x SR1414x5 ET40 5x114.332TiresRims
185/75 SR1515x5.5 ET42 5x114.332TiresRims
195/70 SR1515x6 ET42 5x114.332TiresRims
195/65 HR1616x6.5 ET38 5x114.332TiresRims

Delica Star Wagon 2.5D (KD-P25W)

84 hp · 4D56 I4 215x SR15 4 fitments
GenerationL300 1989–1999
Power84 hp
Engine4D56 I4, Diesel
Center bore110 mm
PCD6x139.7
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215x SR1515x6 ET22 6x139.732TiresRims
225/75 SR1515x6.5 ET25 6x139.732TiresRims
225/70 SR1616x6.5 ET25 6x139.732TiresRims
235/70 HR1616x7 ET20 6x139.732TiresRims

Delica Star Wagon 2.5D (KD-P35W)

84 hp · 4D56 I4 215x SR15 4 fitments
GenerationL300 1989–1999
Power84 hp
Engine4D56 I4, Diesel
Center bore110 mm
PCD6x139.7
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215x SR1515x6 ET22 6x139.732TiresRims
225/75 SR1515x6.5 ET25 6x139.732TiresRims
225/70 SR1616x6.5 ET25 6x139.732TiresRims
235/70 HR1616x7 ET20 6x139.732TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.