Skip to content

2011 Mitsubishi Delica Van tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2011 Mitsubishi Delica Van.

2011 Mitsubishi Delica Van tire sizes

Bolt patterns
4x114.3
II (BVM)
5x114.3
I (SK)

2 generations were sold in 2011. Check your chassis code before ordering wheels.

Fitment tables

3 trims sold in 2011

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Mitsubishi Delica Van II (BVM)

2011 – 2019 1 trim

Delica Van 1.6i DBF-BVM20 (MCV)

107 hp · 1.6 L HR16DE I4 Petrol 1.6 L HR16DE I4 165/80 R14 3 fitments
GenerationII (BVM) 2011–2019
MarketJapan
Power107 hp
Engine1.6 L HR16DE I4 Petrol 1.6 L HR16DE I4, Petrol
Center bore67.1 mm
PCD4x114.3
ThreadM12 x 1.25
FitTire sizeRim size and bolt patternPressure, psiPrices
OE165/80 R1414x5 ET45 4x114.335TiresRims
Alt185/70 R1414x5 ET45 4x114.335TiresRims
Alt185/65 R1515x5.5 ET45 4x114.335TiresRims

Mitsubishi Delica Van I (SK)

1999 – 2011 2 trims

Delica Van 1.8i ABF-SK82MM (MCV)

94 hp · 1.8 L F8 I4 Petrol 1.8 L F8 I4 195/75 R14 2 fitments
GenerationI (SK) 1999–2011
MarketJapan
Power94 hp
Engine1.8 L F8 I4 Petrol 1.8 L F8 I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/75 R1414x5.5 ET50 5x114.3TiresRims
205/65 R1515x6 ET45 5x114.3TiresRims

Delica Van 2.0D ADF-SKF2MM (MCV)

84 hp · 2.0 L RF I4 Diesel 2.0 L RF I4 195/75 R14 2 fitments
GenerationI (SK) 1999–2011
MarketJapan
Power84 hp
Engine2.0 L RF I4 Diesel 2.0 L RF I4, Diesel
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/75 R1414x5.5 ET50 5x114.3TiresRims
205/65 R1515x6 ET45 5x114.3TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.