Skip to content

2008 Mitsubishi Delica Van tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2008 Mitsubishi Delica Van.

2008 Mitsubishi Delica Van tire sizes

Fitment tables

4 trims sold in 2008

Open a trim for its factory package and every alternative size, front and rear.

Mitsubishi Delica Van SK

1999 – 2011 4 trims

Delica Van 1.8i (ABF-SK82MM)

94 hp · F8 I4 185x R14 3 fitments
GenerationSK 1999–2011
Power94 hp
EngineF8 I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185x R1414x5 ET50 5x114.335TiresRims
195/75 SR1414x5.5 ET50 5x114.335TiresRims
205/65 SR1515x6 ET45 5x114.335TiresRims

Delica Van 1.8i (ABF-SK82VM)

94 hp · F8 I4 165x R14 / 145x R12 1 fitment
GenerationSK 1999–2011
Power94 hp
EngineF8 I4, Petrol
Center bore67.1 mm
PCDfront axis 5x114.3 ( 5x4.5 )rear axis 4x150
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front165x R1414x4.5 ET50 front axis 5x114.3 ( 5x4.5 )rear axis 4x150–TiresRims
Rear145x R1212x3.5 ET87 front axis 5x114.3 ( 5x4.5 )rear axis 4x150–TiresRims

Delica Van 2.0D (ADF-SKF2MM)

84 hp · RF I4 185x R14 3 fitments
GenerationSK 1999–2011
Power84 hp
EngineRF I4, Diesel
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185x R1414x5 ET50 5x114.335TiresRims
195/75 SR1414x5.5 ET50 5x114.335TiresRims
205/65 SR1515x6 ET45 5x114.335TiresRims

Delica Van 2.0D (ADF-SKF2VM)

84 hp · RF I4 175x R14 1 fitment
GenerationSK 1999–2011
Power84 hp
EngineRF I4, Diesel
Center bore67.1 mm
PCDfront axis 5x114.3 ( 5x4.5 )rear axis 4x150
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175x R1412x3.5 ET87 front axis 5x114.3 ( 5x4.5 )rear axis 4x150–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.