2012 Mitsubishi Dignity tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2012 Mitsubishi Dignity.

2012 Mitsubishi Dignity tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2012 – 2017 Japan market 1 trim

302 hp · VQ35HR V6 245/50 R18 98V 3 fitments

GenerationBH 2012–2017

Power302 hp

EngineVQ35HR V6, Hybrid

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/50 R18 98V	18x8 ET43 ~~5x114.3~~	35	Tires Rims
245/45 R19 97V	19x8.5 ET45 ~~5x114.3~~	35	Tires Rims
265/40 ZR19 97W	19x9 ET38 ~~5x114.3~~	38	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.