1999 Mitsubishi Dingo tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1999 Mitsubishi Dingo.

1999 Mitsubishi Dingo tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1998 – 2000 Japan market 2 trims

79 hp · 4G13 I4 175/70 R14 84S 3 fitments

GenerationCQ 1998–2000

Power79 hp

Engine4G13 I4, Petrol

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/70 R14 84S	14x5.5 ET46 ~~4x100~~	29	Tires Rims
185/65 R14 86S	14x5.5 ET46 ~~4x100~~	29	Tires Rims
195/55 R15 84H	15x6 ET46 ~~4x100~~	30	Tires Rims

103 hp · 4G15 I4 185/65 R14 86S 3 fitments

GenerationCQ 1998–2000

Power103 hp

Engine4G15 I4, Petrol

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/65 R14 86S	14x5.5 ET46 ~~4x100~~	29	Tires Rims
195/55 R15 84H	15x6 ET46 ~~4x100~~	30	Tires Rims
195/50 R16 83H	16x6 ET46 ~~4x100~~	33	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.