Skip to content

2023 Mitsubishi Eclipse Cross tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2023 Mitsubishi Eclipse Cross.

2023 Mitsubishi Eclipse Cross tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2023

Open a trim for its factory package and every alternative size, front and rear.

Mitsubishi Eclipse Cross Facelift

2020 – 2027 2 trims

Eclipse Cross 1.5T

152 hp · 1.5L 4B40 I4 215/70 R16 99H 4 fitments
GenerationFacelift 2020–2027
MarketUSA
Power152 hp
Engine1.5L 4B40 I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/70 R16 99H16x6.5 ET38 5x114.335TiresRims
225/55 R18 97H18x7 ET38 5x114.335TiresRims
215/65 R17 99H17x6.5 ET38 5x114.335TiresRims
235/50 R19 99V19x7.5 ET38 5x114.335TiresRims

Eclipse Cross 1.5T

162 hp · 1.5L 4B40 I4 215/70 R16 100H 3 fitments
GenerationFacelift 2020–2027
MarketLatin America
Power162 hp
Engine1.5L 4B40 I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/70 R16 100H16x6.5 ET38 5x114.335TiresRims
225/55 R18 98H18x7 ET38 5x114.32.6TiresRims
235/50 R19 99V19x7.5 ET38 5x114.32.6TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.