1988 Mitsubishi Eterna Sava tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1988 Mitsubishi Eterna Sava.

1988 Mitsubishi Eterna Sava tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1988 – 1992 Japan market 3 trims

75 hp · 4D65 I4 165x SR14 4 fitments

GenerationE3 1988–1992

Power75 hp

Engine4D65 I4, Diesel

Center bore67.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165x SR14	14x5.5 ET46 ~~4x114.3~~	29	Tires Rims
185/70 R14 88S	14x5.5 ET46 ~~4x114.3~~	32	Tires Rims
195/65 R14 89S	14x5.5 ET46 ~~4x114.3~~	32	Tires Rims
195/60 R15 88S	15x6 ET46 ~~4x114.3~~	32	Tires Rims

133 hp · 4G67 I4 185/70 R14 88S 4 fitments

GenerationE3 1988–1992

Power133 hp

Engine4G67 I4, Petrol

Center bore67.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/70 R14 88S	14x5.5 ET46 ~~4x114.3~~	32	Tires Rims
195/65 R14 89H	14x5.5 ET46 ~~4x114.3~~	32	Tires Rims
195/60 R15 88H	15x6 ET46 ~~4x114.3~~	32	Tires Rims
195/55 R16 87H	16x6 ET46 ~~4x114.3~~	32	Tires Rims

143 hp · 4G63 I4 195/65 R14 89H 4 fitments

GenerationE3 1988–1992

Power143 hp

Engine4G63 I4, Petrol

Center bore67.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/65 R14 89H	14x5.5 ET46 ~~4x114.3~~	32	Tires Rims
195/60 R15 88H	15x6 ET46 ~~4x114.3~~	32	Tires Rims
205/50 R16 88V	16x6.5 ET48 ~~4x114.3~~	35	Tires Rims
205/45 R17 87V	17x7 ET42 ~~4x114.3~~	35	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.