1993 Mitsubishi Expo tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1993 Mitsubishi Expo.

1993 Mitsubishi Expo tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1992 – 1996 2 trims

113 hp · 1.8 L 4G93 I4 Petrol 1.8 L 4G93 I4 185/70 R14 3 fitments

GenerationExpo 1992–1996

MarketUSA

Power113 hp

Engine1.8 L 4G93 I4 Petrol 1.8 L 4G93 I4, Petrol

Center bore67.1 mm

PCD4x114.3

ThreadM12 x 1.5

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	185/70 R14	14x5.5 ET46 ~~4x114.3~~	29	Tires Rims
Alt	195/60 R15	15x6 ET46 ~~4x114.3~~	32	Tires Rims
Alt	205/55 R16	16x6.5 ET46 ~~4x114.3~~	32	Tires Rims

114 hp · 2.4 L 4G64 I4 Petrol 2.4 L 4G64 I4 185/70 R14 3 fitments

GenerationExpo 1992–1996

MarketUSA

Power114 hp

Engine2.4 L 4G64 I4 Petrol 2.4 L 4G64 I4, Petrol

Center bore67.1 mm

PCD4x114.3

ThreadM12 x 1.5

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	185/70 R14	14x5.5 ET46 ~~4x114.3~~	29	Tires Rims
Alt	195/60 R15	15x6 ET46 ~~4x114.3~~	32	Tires Rims
Alt	205/55 R16	16x6.5 ET46 ~~4x114.3~~	32	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.