Skip to content

2011 Mitsubishi Galant Fortis tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2011 Mitsubishi Galant Fortis.

2011 Mitsubishi Galant Fortis tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2011

Open a trim for its factory package and every alternative size, front and rear.

Mitsubishi Galant Fortis CY

2007 – 2015 Japan market 2 trims

Galant Fortis 1.8i (DBA-CY4A)

137 hp · 4B11 I4 205/60 R16 92H 3 fitments
GenerationCY 2007–2015
Power137 hp
Engine4B11 I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/60 R16 92H16x6.5 ET46 5x114.330TiresRims
205/55 R17 91V17x6.5 ET46 5x114.330TiresRims
215/45 ZR18 89W18x7 ET46 5x114.333TiresRims

Galant Fortis 2.0T (CBA-CY4A)

237 hp · 4B11 I4 215/45 ZR18 89W 3 fitments
GenerationCY 2007–2015
Power237 hp
Engine4B11 I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/45 ZR18 89W18x7 ET46 5x114.333TiresRims
235/40 ZR18 89W18x7.5 ET42 5x114.333TiresRims
235/35 ZR19 87W19x7.5 ET42 5x114.336TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.