Skip to content

1996 Mitsubishi Galant Sports tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1996 Mitsubishi Galant Sports.

1996 Mitsubishi Galant Sports tire sizes

Bolt pattern
Fitment tables

3 trims sold in 1996

Open a trim for its factory package and every alternative size, front and rear.

Mitsubishi Galant Sports E5/E7

1994 – 1996 Japan market 3 trims

Galant Sports 2.0i (E-E54A)

143 hp · 6A12 I4 185/70 R14 88S 4 fitments
GenerationE5/E7 1994–1996
Power143 hp
Engine6A12 I4, Petrol
Center bore67.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/70 R14 88S14x5.5 ET46 4x114.329TiresRims
195/65 R14 89S14x5.5 ET46 4x114.332TiresRims
195/60 R15 88H15x6 ET46 4x114.332TiresRims
205/60 R15 91H15x6 ET46 4x114.332TiresRims

Galant Sports 2.0T AT (E-E74A)

212 hp · 6A12 I4 205/60 R15 91H 4 fitments
GenerationE5/E7 1994–1996
Power212 hp
Engine6A12 I4, Petrol
Center bore67.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/60 R15 91H15x6 ET46 4x114.332TiresRims
205/55 R16 91H16x6 ET46 4x114.332TiresRims
205/50 R16 89V16x6.5 ET48 4x114.335TiresRims
215/45 R17 89V17x7 ET42 4x114.335TiresRims

Galant Sports 2.0T MT (E-E74A)

237 hp · 6A12 I4 205/60 R15 91H 4 fitments
GenerationE5/E7 1994–1996
Power237 hp
Engine6A12 I4, Petrol
Center bore67.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/60 R15 91H15x6 ET46 4x114.332TiresRims
205/55 R16 91H16x6 ET46 4x114.332TiresRims
205/50 R16 89V16x6.5 ET48 4x114.335TiresRims
215/45 R17 89V17x7 ET42 4x114.335TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.