1994 Mitsubishi GTO tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1994 Mitsubishi GTO.

1994 Mitsubishi GTO tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1994 – 1997 Japan market 3 trims

221 hp · 3.0L 6G72 V6 225/50 R17 94V 4 fitments

GenerationZ15/Z16 1994–1997

Power221 hp

Engine3.0L 6G72 V6, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/50 R17 94V	17x7.5 ET46 ~~5x114.3~~	2	Tires Rims
235/45 R17 94V	17x7.5 ET46 ~~5x114.3~~	2	Tires Rims
245/45 R17 95W	17x8 ET46 ~~5x114.3~~	2	Tires Rims
245/40 R18 93W	18x8 ET46 ~~5x114.3~~	2	Tires Rims

276 hp · 3.0L 6G72 V6 245/40 R18 93W / 265/40 R18 97W 4 fitments

GenerationZ15/Z16 1994–1997

Power276 hp

Engine3.0L 6G72 V6, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front245/40 R18 93W	18x8 ET45 ~~5x114.3~~	32	Tires Rims
Rear265/40 R18 97W	18x9 ET45 ~~5x114.3~~	29	Tires Rims
235/45 R17 94W	17x7.5 ET46 ~~5x114.3~~	2	Tires Rims
245/45 R17 95W	17x8 ET46 ~~5x114.3~~	2	Tires Rims
245/40 R18 93W	18x8 ET46 ~~5x114.3~~	2	Tires Rims

276 hp · 3.0L 6G72 V6 245/40 R18 93W / 265/40 R18 97W 4 fitments

GenerationZ15/Z16 1994–1997

Power276 hp

Engine3.0L 6G72 V6, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front245/40 R18 93W	18x8 ET45 ~~5x114.3~~	32	Tires Rims
Rear265/40 R18 97W	18x9 ET45 ~~5x114.3~~	29	Tires Rims
235/45 R17 94W	17x7.5 ET46 ~~5x114.3~~	2	Tires Rims
245/45 R17 95W	17x8 ET46 ~~5x114.3~~	2	Tires Rims
245/40 R18 93W	18x8 ET46 ~~5x114.3~~	2	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.