2011 Mitsubishi i tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2011 Mitsubishi i.

2011 Mitsubishi i tire sizes

145/65R15 175/55R15

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2005 – 2013 Japan market 2 trims

51 hp · 3B20 I3 145/65 R15 72T / 175/55 R15 77V 1 fitment

GenerationHA 2005–2013

Power51 hp

Engine3B20 I3, Petrol

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front145/65 R15 72T	15x4 ET35 ~~4x100~~	35	Tires Rims
Rear175/55 R15 77V	15x5 ET35 ~~4x100~~	35	Tires Rims

63 hp · 3B20 I3 145/65 R15 72T / 175/55 R15 77V 1 fitment

GenerationHA 2005–2013

Power63 hp

Engine3B20 I3, Petrol

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front145/65 R15 72T	15x4 ET35 ~~4x100~~	35	Tires Rims
Rear175/55 R15 77V	15x5 ET35 ~~4x100~~	35	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.