2008 Mitsubishi L200 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2008 Mitsubishi L200.

2008 Mitsubishi L200 tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2005 – 2015 2 trims

145 hp · 2.4L I4 205/80 R16 104S 4 fitments

GenerationML/MN 2005–2015

MarketMiddle East

Power145 hp

Engine2.4L I4, Petrol

Center bore67.1 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/80 R16 104S	16x6 ET46 ~~6x139.7~~	32	Tires Rims
205x R16 110S	16x6 ET46 ~~6x139.7~~	35	Tires Rims
245/70 R16 111S	16x7 ET38 ~~6x139.7~~	29	Tires Rims
245/65 R17 111S	17x7.5 ET38 ~~6x139.7~~	29	Tires Rims

134 hp · 2.5L 4D56 I4 205/80 R16 104S 4 fitments

GenerationML/MN 2005–2015

MarketEurope

Power134 hp

Engine2.5L 4D56 I4, Diesel

Center bore67.1 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/80 R16 104S	16x6 ET46 ~~6x139.7~~	32	Tires Rims
205x R16 110S	16x6 ET46 ~~6x139.7~~	35	Tires Rims
245/70 R16 111S	16x7 ET38 ~~6x139.7~~	29	Tires Rims
245/65 R17 111S	17x7.5 ET38 ~~6x139.7~~	29	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.