1989 Mitsubishi L300 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1989 Mitsubishi L300.

1989 Mitsubishi L300 tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1987 – 2013 2 trims

114 hp · 2.0 L 4G63 I4 Petrol 2.0 L 4G63 I4 205/70 R15 2 fitments

GenerationII 1987–2013

MarketMexico

Power114 hp

Engine2.0 L 4G63 I4 Petrol 2.0 L 4G63 I4, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/70 R15	15x5.5 ET40 ~~5x114.3~~	32	Tires Rims
205/65 R16	16x6 ET40 ~~5x114.3~~	32	Tires Rims

76 hp · 2.5 L 4D56 I4 Diesel 2.5 L 4D56 I4 205/70 SR15 2 fitments

GenerationII 1987–2013

MarketMexico

Power76 hp

Engine2.5 L 4D56 I4 Diesel 2.5 L 4D56 I4, Diesel

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/70 SR15	15x5.5 ET40 ~~5x114.3~~	32	Tires Rims
205/65 SR16	16x6 ET40 ~~5x114.3~~	32	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.