1997 Mitsubishi L300 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1997 Mitsubishi L300.

1997 Mitsubishi L300 tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1994 – 2013 3 trims

103 hp · 4G32 I4 195x R14 4 fitments

GenerationIII 1994–2013

MarketEurope

Power103 hp

Engine4G32 I4, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195x R14	14x5.5 ET40 ~~5x114.3~~	29	Tires Rims
205/70 SR15	15x6 ET40 ~~5x114.3~~	29	Tires Rims
205/65 SR16	16x6 ET40 ~~5x114.3~~	32	Tires Rims
215/65 SR16	16x6.5 ET38 ~~5x114.3~~	32	Tires Rims

113 hp · 4G63 I4 185x R14 4 fitments

GenerationIII 1994–2013

MarketLatin America

Power113 hp

Engine4G63 I4, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185x R14	14x5.5 ET40 ~~5x114.3~~	32	Tires Rims
195x R14	14x5.5 ET40 ~~5x114.3~~	32	Tires Rims
205/70 SR15	15x5.5 ET40 ~~5x114.3~~	32	Tires Rims
205/65 SR16	16x6 ET40 ~~5x114.3~~	32	Tires Rims

70 hp · 4D56 I4 195x R14 4 fitments

GenerationIII 1994–2013

MarketEurope

Power70 hp

Engine4D56 I4, Diesel

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195x R14	14x5.5 ET40 ~~5x114.3~~	29	Tires Rims
205/70 SR15	15x6 ET40 ~~5x114.3~~	29	Tires Rims
205/65 SR16	16x6 ET40 ~~5x114.3~~	32	Tires Rims
215/65 SR16	16x6.5 ET38 ~~5x114.3~~	32	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.