Skip to content

2008 Mitsubishi Lancer Cargo tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2008 Mitsubishi Lancer Cargo.

2008 Mitsubishi Lancer Cargo tire sizes

Bolt pattern
Fitment tables

4 trims sold in 2008

Open a trim for its factory package and every alternative size, front and rear.

Mitsubishi Lancer Cargo Y12

2008 – 2017 Japan market 4 trims

Lancer Cargo 1.2i (DBE-CVAY12)

89 hp · CR12DE I4 165x R13 3 fitments
GenerationY12 2008–2017
Power89 hp
EngineCR12DE I4, Petrol
Center bore60.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
165x R1313x5 ET40 4x10029TiresRims
175/70 SR1414x5 ET40 4x10029TiresRims
185/65 SR1414x5.5 ET45 4x10029TiresRims

Lancer Cargo 1.5i (DBF-CVY12)

107 hp · HR15DE I4 165x R13 3 fitments
GenerationY12 2008–2017
Power107 hp
EngineHR15DE I4, Petrol
Center bore60.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
165x R1313x5 ET40 4x10029TiresRims
175/70 SR1414x5 ET40 4x10029TiresRims
185/65 SR1414x5.5 ET45 4x10029TiresRims

Lancer Cargo 1.6i (DBF-CVZNY12)

107 hp · HR16DE I4 165x R14 3 fitments
GenerationY12 2008–2017
Power107 hp
EngineHR16DE I4, Petrol
Center bore60.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
165x R1414x5 ET40 4x10029TiresRims
175/75 R1414x5 ET40 4x10029TiresRims
185/65 SR1515x5.5 ET45 4x10029TiresRims

Lancer Cargo 1.8i (DBF-CVJY12)

122 hp · HR18DE I4 165x R13 3 fitments
GenerationY12 2008–2017
Power122 hp
EngineHR18DE I4, Petrol
Center bore60.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
165x R1313x5 ET40 4x10029TiresRims
175/70 SR1414x5 ET40 4x10029TiresRims
185/65 SR1414x5.5 ET45 4x10029TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.