Skip to content

2017 Mitsubishi Lancer Evolution tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2017 Mitsubishi Lancer Evolution.

2017 Mitsubishi Lancer Evolution tire sizes

Bolt pattern
Fitment tables

1 trim sold in 2017

Open a trim for its factory package and every alternative size, front and rear.

Mitsubishi Lancer Evolution CA X

2007 – 2017 1 trim

Lancer Evolution 2.0T FE (CBA-CZ4A)

308 hp · 4B11 I4 245/40 ZR18 93W 1 fitment
GenerationCA X 2007–2017
Power308 hp
Engine4B11 I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
245/40 ZR18 93W18x8.5 ET38 5x114.32.1TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.