Skip to content

2002 Mitsubishi Montero Sport tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2002 Mitsubishi Montero Sport.

2002 Mitsubishi Montero Sport tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2002

Open a trim for its factory package and every alternative size, front and rear.

Mitsubishi Montero Sport PA

1996 – 2008 3 trims

Montero Sport 2.5TD

103 hp · I4 245/70 R16 107S 4 fitments
GenerationPA 1996–2008
Power103 hp
EngineI4, Diesel
Center bore108.1 mm
PCD6x139.7
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
245/70 R16 107S16x7 ET10 6x139.72TiresRims
235/75 R15 105S15x6 ET33 6x139.72TiresRims
255/70 R16 111T16x7 ET10 6x139.72TiresRims
265/65 R17 110T17x7.5 ET0 6x139.729TiresRims

Montero Sport 3.0i

170 hp · V6 245/70 R16 107S 5 fitments
GenerationPA 1996–2008
Power170 hp
EngineV6, Petrol
Center bore108.1 mm
PCD6x139.7
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
245/70 R16 107S16x7 ET10 6x139.72TiresRims
255/70 R16 111H16x7 ET10 6x139.72TiresRims
265/70 R16 112S16x7 ET10 6x139.72TiresRims
265/65 R17 110H17x7.5 ET0 6x139.729TiresRims
265/60 R18 109H18x8 ET0 6x139.729TiresRims

Montero Sport 3.5i

194 hp · V6 245/70 R16 107S 5 fitments
GenerationPA 1996–2008
Power194 hp
EngineV6, Petrol
Center bore108.1 mm
PCD6x139.7
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
245/70 R16 107S16x7 ET10 6x139.72TiresRims
255/70 R16 111H16x7 ET10 6x139.72TiresRims
265/70 R16 112H16x7 ET10 6x139.72TiresRims
265/65 R17 110H17x7.5 ET0 6x139.729TiresRims
265/60 R18 110V18x8 ET0 6x139.729TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.