2010 Mitsubishi Montero Sport tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2010 Mitsubishi Montero Sport.

2010 Mitsubishi Montero Sport tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2008 – 2015 3 trims

176 hp · I4 245/70 R16 109S 4 fitments

GenerationPB/PC 2008–2015

Power176 hp

EngineI4, Diesel

Center bore67.1 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/70 R16 109S	16x7 ET38 ~~6x139.7~~	2	Tires Rims
265/70 R16 112S	16x7 ET38 ~~6x139.7~~	2	Tires Rims
265/65 R17 112S	17x7.5 ET38 ~~6x139.7~~	29	Tires Rims
265/60 R18 111H	18x8 ET33 ~~6x139.7~~	2.2	Tires Rims

161 hp · I4 265/70 R16 112S 4 fitments

GenerationPB/PC 2008–2015

Power161 hp

EngineI4, Diesel

Center bore67.1 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
265/70 R16 112S	16x7 ET38 ~~6x139.7~~	2	Tires Rims
265/65 R17 112S	17x7.5 ET38 ~~6x139.7~~	29	Tires Rims
265/60 R18 111H	18x8 ET38 ~~6x139.7~~	29	Tires Rims
265/50 R20 110V	20x8.5 ET33 ~~6x139.7~~	2.2	Tires Rims

186 hp · 6G74 V6 265/70 R16 112S 4 fitments

GenerationPB/PC 2008–2015

Power186 hp

Engine6G74 V6, Petrol

Center bore67.1 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
265/70 R16 112S	16x7 ET38 ~~6x139.7~~	2	Tires Rims
265/65 R17 112S	17x7.5 ET38 ~~6x139.7~~	29	Tires Rims
265/60 R18 111H	18x8 ET38 ~~6x139.7~~	29	Tires Rims
265/50 R20 110V	20x8.5 ET33 ~~6x139.7~~	2.2	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.