1989 Mitsubishi Montero tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1989 Mitsubishi Montero.

1989 Mitsubishi Montero tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1982 – 1990 2 trims

87 hp · I4 29x7.60 R15 5 fitments

GenerationL040 1982–1990

Power87 hp

EngineI4, Diesel

Center bore108.1 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
29x7.60 R15	15x6 ET22 ~~6x139.7~~	2	Tires Rims
215x SR15	15x6 ET22 ~~6x139.7~~	2	Tires Rims
235/75 SR15	15x6.5 ET15 ~~6x139.7~~	2	Tires Rims
205/80 SR16	16x6 ET22 ~~6x139.7~~	2	Tires Rims
245/70 SR16	16x7 ET10 ~~6x139.7~~	2	Tires Rims

139 hp · V6 215x SR15 5 fitments

GenerationL040 1982–1990

Power139 hp

EngineV6, Petrol

Center bore108.1 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215x SR15	15x6 ET22 ~~6x139.7~~	2	Tires Rims
31x10.50 R15	15x7 ET10 ~~6x139.7~~	2	Tires Rims
265/70 SR15	15x7 ET10 ~~6x139.7~~	2	Tires Rims
265/70 SR16	16x7 ET10 ~~6x139.7~~	2	Tires Rims
265/65 HR17	17x7.5 ET0 ~~6x139.7~~	29	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.