1999 Mitsubishi Pistachio tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1999 Mitsubishi Pistachio.

1999 Mitsubishi Pistachio tire sizes

Bolt pattern

Other years

1999 2000 All 1999–2000

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1999 – 2000 Japan market 1 trim

72 hp · 4A31 I4 135/80 SR13 3 fitments

GenerationH44 1999–2000

Power72 hp

Engine4A31 I4, Petrol

Center bore67.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
135/80 SR13	13x4 ET46 ~~4x114.3~~	26	Tires Rims
155/70 SR13	13x4.5 ET46 ~~4x114.3~~	26	Tires Rims
165/55 HR14	14x5 ET42 ~~4x114.3~~	29	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.