2008 Mitsubishi Raider tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2008 Mitsubishi Raider.

2008 Mitsubishi Raider tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2006 – 2009 USA market 2 trims

211 hp · V6 245/70 SR16 3 fitments

GenerationND 2006–2009

Power211 hp

EngineV6, Petrol

Center bore108.1 mm

PCD5x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/70 SR16	16x7 ET10 ~~5x139.7~~	29	Tires Rims
265/70 SR16	16x7 ET10 ~~5x139.7~~	29	Tires Rims
265/65 HR17	17x8 ET0 ~~5x139.7~~	29	Tires Rims

231 hp · V8 265/65 HR17 2 fitments

GenerationND 2006–2009

Power231 hp

EngineV8, Petrol

Center bore108.1 mm

PCD5x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
265/65 HR17	17x8 ET0 ~~5x139.7~~	29	Tires Rims
275/55 VR18	18x8 ET0 ~~5x139.7~~	32	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.