1996 Mitsubishi Sigma tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1996 Mitsubishi Sigma.

1996 Mitsubishi Sigma tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1990 – 1995 Japan market 1 trim

202 hp · 3.0L 6G72 V6 205/65 R15 93H 4 fitments

GenerationFA 1990–1995

Power202 hp

Engine3.0L 6G72 V6, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/65 R15 93H	15x6 ET46 ~~5x114.3~~	29	Tires Rims
215/60 R15 94H	15x6 ET46 ~~5x114.3~~	29	Tires Rims
215/55 R16 92V	16x6.5 ET46 ~~5x114.3~~	30	Tires Rims
225/55 R16 92V	16x7 ET38 ~~5x114.3~~	30	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.