Skip to content

1990 Mitsubishi Space Wagon tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1990 Mitsubishi Space Wagon.

1990 Mitsubishi Space Wagon tire sizes

Bolt pattern
Fitment tables

3 trims sold in 1990

Open a trim for its factory package and every alternative size, front and rear.

Mitsubishi Space Wagon I (D00)

1983 – 1991 3 trims

Space Wagon 1.8TD (MPV)

74 hp · 1.8 L 4D65T I4 Diesel 1.8 L 4D65T I4 185/70 R13 3 fitments
GenerationI (D00) 1983–1991
MarketEurope
Power74 hp
Engine1.8 L 4D65T I4 Diesel 1.8 L 4D65T I4, Diesel
Center bore67.1 mm
PCD4x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE185/70 R1313x5.5 ET46 4x114.3–TiresRims
Alt185/65 R1414x5.5 ET46 4x114.3–TiresRims
Alt195/55 R1515x6 ET46 4x114.3–TiresRims

Space Wagon 2.0 (MPV)

83 hp · 2.0 L G63B I4 Petrol 2.0 L G63B I4 185/70 R13 3 fitments
GenerationI (D00) 1983–1991
MarketEurope
Power83 hp
Engine2.0 L G63B I4 Petrol 2.0 L G63B I4, Petrol
Center bore67.1 mm
PCD4x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE185/70 R1313x5.5 ET46 4x114.3–TiresRims
Alt185/65 R1414x5.5 ET46 4x114.3–TiresRims
Alt195/55 R1515x6 ET46 4x114.3–TiresRims

Space Wagon 2.0i (MPV)

101 hp · 2.0 L 4G63 I4 Petrol 2.0 L 4G63 I4 185/70 R13 3 fitments
GenerationI (D00) 1983–1991
MarketEurope
Power101 hp
Engine2.0 L 4G63 I4 Petrol 2.0 L 4G63 I4, Petrol
Center bore67.1 mm
PCD4x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE185/70 R1313x5.5 ET46 4x114.3–TiresRims
Alt185/65 R1414x5.5 ET46 4x114.3–TiresRims
Alt195/55 R1515x6 ET46 4x114.3–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.