1985 Mitsubishi Starion tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1985 Mitsubishi Starion.

1985 Mitsubishi Starion tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1982 – 1990 Japan market 1 trim

173 hp · G63B I4 205/55 R16 88V / 225/50 R16 92V 2 fitments

GenerationA1 1982–1990

Power173 hp

EngineG63B I4, Petrol

Center bore67.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front205/55 R16 88V	16x6.5 ET18 ~~4x114.3~~	30	Tires Rims
Rear225/50 R16 92V	16x7.5 ET0 ~~4x114.3~~	30	Tires Rims
215/60 R15 89V	15x6.5 ET18 ~~4x114.3~~	30	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.