2011 Mitsubishi Strada tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2011 Mitsubishi Strada.

2011 Mitsubishi Strada tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2005 – 2015 1 trim

176 hp · 2.5L 4D56 I4 205x R16 110S 4 fitments

GenerationML/MN 2005–2015

Power176 hp

Engine2.5L 4D56 I4, Diesel

Center bore67.1 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205x R16 110S	16x6 ET46 ~~6x139.7~~	29	Tires Rims
245/70 R16 111S	16x7 ET38 ~~6x139.7~~	29	Tires Rims
245/65 R17 111S	17x7.5 ET38 ~~6x139.7~~	32	Tires Rims
265/60 R18 110H	18x7.5 ET38 ~~6x139.7~~	32	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.