Skip to content

2021 Mitsubishi Strada tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2021 Mitsubishi Strada.

Bolt patterns
6x139.7
KK/KL Facelift
5x114.3
KK/KL Facelift
Fitment tables

3 trims sold in 2021

Open a trim for its factory package and every alternative size, front and rear.

Mitsubishi Strada KK/KL Facelift

2019 – 2023 3 trims

Strada 2.4 Di-D

165 hp · 2.4L 4N15 I4 205x R16 110R 6 fitments
GenerationKK/KL Facelift 2019–2023
Power165 hp
Engine2.4L 4N15 I4, Diesel
Center bore67.1 mm
PCD6x139.7
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205x R16 110R16x6 ET46 6x139.735TiresRims
205/80 R16 104S16x6 ET46 6x139.732TiresRims
245/70 R16 111S16x7 ET38 6x139.729TiresRims
245/65 R17 110H17x7 ET38 6x139.729TiresRims
245/65 R17 110H17x7.5 ET38 6x139.729TiresRims
265/60 R18 110H18x7.5 ET38 6x139.732TiresRims

Strada 2.4 Di-D+

178 hp · 2.4L 4N15 I4 245/65 R17 110H 6 fitments
GenerationKK/KL Facelift 2019–2023
Power178 hp
Engine2.4L 4N15 I4, Diesel
Center bore67.1 mm
PCD6x139.7
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
245/65 R17 110H17x7 ET38 6x139.729TiresRims
265/60 R18 110H18x7.5 ET38 6x139.732TiresRims
245/65 R17 110H17x7.5 ET38 6x139.729TiresRims
265/55 R19 109H19x8 ET38 6x139.732TiresRims
265/50 R20 107H20x8 ET38 6x139.735TiresRims
275/50 R20 109V20x8.5 ET35 6x139.735TiresRims

Strada 2.5 Di-D

126 hp · 2.5L 4D56 I4 195x R15 106R 4 fitments
GenerationKK/KL Facelift 2019–2023
Power126 hp
Engine2.5L 4D56 I4, Diesel
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195x R15 106R15x6 ET46 5x114.332TiresRims
215/70 R15 109R15x6 ET46 5x114.332TiresRims
205/80 R16 104S16x6 ET46 5x114.332TiresRims
205/75 R16 110R16x6 ET46 5x114.335TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.