1996 Mitsubishi Verada tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1996 Mitsubishi Verada.

1996 Mitsubishi Verada tire sizes

205/65R15 225/50R17 215/55R16 215/60R16 215/55R17 235/45R17

Bolt pattern

5x114.3

2 generations were sold in 1996. Check your chassis code before ordering wheels.

Other years

1992 1993 1994 1995 1996 1997 1998 1999 All 1991–2005

Fitment tables

2 trims sold in 1996

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Mitsubishi Verada KE/KF

1996 – 1999 Australia market 1 trim

Verada 3.0i

188 hp · V6 205/65 R15 94H 4 fitments

GenerationKE/KF 1996–1999

Power188 hp

EngineV6, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/65 R15 94H	15x6 ET46 ~~5x114.3~~	30	Tires Rims
215/60 R16 95H	16x6 ET46 ~~5x114.3~~	30	Tires Rims
215/55 R17 93H	17x6.5 ET46 ~~5x114.3~~	30	Tires Rims
225/50 R17 93V	17x7 ET42 ~~5x114.3~~	33	Tires Rims

Mitsubishi Verada KR/KS

1991 – 1996 Australia market 1 trim

Verada 3.0i

166 hp · V6 205/65 R15 93H 4 fitments

GenerationKR/KS 1991–1996

Power166 hp

EngineV6, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/65 R15 93H	15x6 ET46 ~~5x114.3~~	32	Tires Rims
215/55 R16 91H	16x6.5 ET48 ~~5x114.3~~	32	Tires Rims
225/50 R17 91V	17x7 ET46 ~~5x114.3~~	35	Tires Rims
235/45 R17 91V	17x7.5 ET44 ~~5x114.3~~	35	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.