Skip to content

2026 Mitsubishi Xforce tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2026 Mitsubishi Xforce.

2026 Mitsubishi Xforce tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2026

Open a trim for its factory package and every alternative size, front and rear.

Mitsubishi Xforce Xforce

2023 – 2027 2 trims

Xforce 1.5i

103 hp · 1.5 L 4A91 I4 Petrol 1.5 L 4A91 I4 225/50 R18 2 fitments
GenerationXforce 2023–2027
MarketSoutheast Asia
Power103 hp
Engine1.5 L 4A91 I4 Petrol 1.5 L 4A91 I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/50 R1818x7 ET38 5x114.3–TiresRims
Alt205/60 R1717x6.5 ET38 5x114.3–TiresRims

Xforce 1.6 HEV

114 hp · 1.6 L 4A92 I4 Hybrid 1.6 L 4A92 I4 225/50 R18 2 fitments
GenerationXforce 2023–2027
MarketSoutheast Asia
Power114 hp
Engine1.6 L 4A92 I4 Hybrid 1.6 L 4A92 I4, Hybrid
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/50 R1818x7 ET38 5x114.3–TiresRims
Alt205/60 R1717x6.5 ET38 5x114.3–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.