Skip to content

1993 Nissan 200SX tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1993 Nissan 200SX.

Bolt patterns
5x114.3
II (S14)
4x114.3
I (S13)

2 generations were sold in 1993. Check your chassis code before ordering wheels.

Fitment tables

3 trims sold in 1993

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Nissan 200SX II (S14)

1993 – 2000 2 trims

200SX 2.0i

158 hp · 2.0L SR20DE I4 205/60 R15 91H 3 fitments
GenerationII (S14) 1993–2000
Power158 hp
Engine2.0L SR20DE I4, Petrol
Center bore66.1 mm
PCD5x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
205/60 R15 91H15x6 ET40 5x114.330TiresRims
205/55 R16 89V16x6.5 ET45 5x114.332TiresRims
205/50 R17 87V17x6.5 ET45 5x114.332TiresRims

200SX 2.0i Turbo

197 hp · 2.0L SR20DET I4 205/55 R16 89V 3 fitments
GenerationII (S14) 1993–2000
Power197 hp
Engine2.0L SR20DET I4, Petrol
Center bore66.1 mm
PCD5x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
205/55 R16 89V16x6.5 ET45 5x114.332TiresRims
205/50 R17 87V17x6.5 ET45 5x114.332TiresRims
205/50 R17 87V17x7.5 ET45 5x114.32.4TiresRims

Nissan 200SX I (S13)

1988 – 1993 1 trim

200SX 1.8 Turbo

166 hp · I4 195/60 R15 88V 4 fitments
GenerationI (S13) 1988–1993
Power166 hp
EngineI4, Petrol
Center bore66.1 mm
PCD4x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
195/60 R15 88V15x6 ET40 4x114.32.2TiresRims
175/70 R1313x6 ET37 4x114.32.2TiresRims
175/65 R1414x6 ET37 4x114.32.2TiresRims
195/55 R1515x6.5 ET37 4x114.32.2TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.