1995 Nissan 240SX tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1995 Nissan 240SX.

1995 Nissan 240SX tire sizes

Bolt patterns

II (S14)

II (S14)

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1995 – 1998 2 trims

156 hp · I4 195/60 R15 87H 2 fitments

GenerationII (S14) 1995–1998

Power156 hp

EngineI4, Petrol

Center bore66.1 mm

PCD4x114.3

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/60 R15 87H	15x6 ET40 ~~4x114.3~~	29	Tires Rims
205/60 R15 90H	15x6 ET40 ~~4x114.3~~	29	Tires Rims

156 hp · I4 205/55 R16 89V 1 fitment

GenerationII (S14) 1995–1998

Power156 hp

EngineI4, Petrol

Center bore66.1 mm

PCD5x114.3

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/55 R16 89V	16x6.5 ET45 ~~5x114.3~~	29	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.