1984 Nissan 300ZX tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1984 Nissan 300ZX.

1984 Nissan 300ZX tire sizes

215/60RH15 215/60RV15 195/70RH14 195/70RS14 205/55RV16 225/50RV16

Bolt patterns

4x114.3

I (Z31)

5x114.3

I (Z31)

Other years

1984 1985 1986 1987 1988 1989 1990 1991 All 1984–1996

Fitment tables

4 trims sold in 1984

Open a trim for its factory package and every alternative size, front and rear.

Nissan 300ZX I (Z31)

1984 – 1990 4 trims

300ZX 3.0

160 hp · 3.0L VG30E V6 195/70 SR14 2 fitments

GenerationI (Z31) 1984–1990

MarketUSA

Power160 hp

Engine3.0L VG30E V6, Petrol

Center bore66.1 mm

PCD4x114.3

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/70 SR14	14x6.5 ET30 ~~4x114.3~~	–	Tires Rims
215/60 HR15	15x6.5 ET30 ~~4x114.3~~	–	Tires Rims

300ZX 3.0

168 hp · 3.0L VG30E V6 195/70 HR14 2 fitments

GenerationI (Z31) 1984–1990

MarketAustralia

Power168 hp

Engine3.0L VG30E V6, Petrol

Center bore66.1 mm

PCD4x114.3

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/70 HR14	14x6.5 ET30 ~~4x114.3~~	–	Tires Rims
215/60 VR15	15x6.5 ET30 ~~4x114.3~~	–	Tires Rims

300ZX 3.0T

200 hp · 3.0L VG30ET V6 215/60 HR15 2 fitments

GenerationI (Z31) 1984–1990

MarketUSA

Power200 hp

Engine3.0L VG30ET V6, Petrol

Center bore66.1 mm

PCD5x114.3

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/60 HR15	15x6.5 ET30 ~~5x114.3~~	–	Tires Rims
225/50 VR16	16x7 ET20 ~~5x114.3~~	–	Tires Rims

300ZX 3.0T

225 hp · 3.0L VG30ET V6 215/60 VR15 2 fitments

GenerationI (Z31) 1984–1990

MarketAustralia

Power225 hp

Engine3.0L VG30ET V6, Petrol

Center bore66.1 mm

PCD5x114.3

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/60 VR15	15x6.5 ET30 ~~5x114.3~~	–	Tires Rims
205/55 VR16	16x7 ET30 ~~5x114.3~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.