1994 Nissan AD tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1994 Nissan AD.

1994 Nissan AD tire sizes

175/65R14

Bolt pattern

4x100

Other years

1990 1991 1992 1993 1994 1995 1996 1997 All 1990–2025

Fitment tables

5 trims sold in 1994

Open a trim for its factory package and every alternative size, front and rear.

Nissan AD II (Y10)

1990 – 1999 5 trims

AD 1.3 (WY10)

78 hp · I4 155x R13 1 fitment

GenerationII (Y10) 1990–1999

Power78 hp

EngineI4, Petrol

Center bore60 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155x R13	13x5 ET40 ~~4x100~~	–	Tires Rims

AD 1.5 (WFGY10)

93 hp · I4 155x R13 2 fitments

GenerationII (Y10) 1990–1999

Power93 hp

EngineI4, Petrol

Center bore60 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155x R13	13x5 ET40 ~~4x100~~	–	Tires Rims
175/65 R14 82H	14x5.5 ET45 ~~4x100~~	–	Tires Rims

AD 1.5 (WFNY10)

93 hp · I4 155x R13 1 fitment

GenerationII (Y10) 1990–1999

Power93 hp

EngineI4, Petrol

Center bore60 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155x R13	13x5 ET40 ~~4x100~~	–	Tires Rims

AD 1.5 (WFY10)

93 hp · I4 155x R13 1 fitment

GenerationII (Y10) 1990–1999

Power93 hp

EngineI4, Petrol

Center bore60 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155x R13	13x5 ET40 ~~4x100~~	–	Tires Rims

AD 2.0D (WEY10)

75 hp · I4 155x R13 1 fitment

GenerationII (Y10) 1990–1999

Power75 hp

EngineI4, Diesel

Center bore60 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155x R13	13x5 ET40 ~~4x100~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.