2008 Nissan Almera Classic tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2008 Nissan Almera Classic.

2008 Nissan Almera Classic tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2006 – 2012 1 trim

106 hp · 1.6L QG16DE I4 175/70 R14 88H 7 fitments

GenerationB10 2006–2012

Power106 hp

Engine1.6L QG16DE I4, Petrol

Center bore66.1 mm

PCD4x114.3

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/70 R14 88H	14x5 ET35 ~~4x114.3~~	2.1	Tires Rims
185/65 R15 88H	15x6 ET40 ~~4x114.3~~	2	Tires Rims
185/70 R14	14x5.5 ET35 ~~4x114.3~~	2	Tires Rims
185/70 R14	14x6 ET35 ~~4x114.3~~	2	Tires Rims
195/60 R15	15x6 ET40 ~~4x114.3~~	2	Tires Rims
205/50 R16	16x6.5 ET40 ~~4x114.3~~	2	Tires Rims
205/50 R16	16x7 ET35 ~~4x114.3~~	2	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.