2001 Nissan Almera tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2001 Nissan Almera.

2001 Nissan Almera tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2000 – 2006 3 trims

89 hp · 1.5L QG15DE I4 185/65 R15 88H 5 fitments

GenerationII (N16) 2000–2006

Power89 hp

Engine1.5L QG15DE I4, Petrol

Center bore66.1 mm

PCD4x114.3

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/65 R15 88H	15x6 ET45 ~~4x114.3~~	2	Tires Rims
175/70 R15 86H	15x6 ET45 ~~4x114.3~~	2	Tires Rims
195/60 R15 88H	15x6 ET45 ~~4x114.3~~	2	Tires Rims
195/55 R16 87V	16x7 ET45 ~~4x114.3~~	2.1	Tires Rims
215/45 ZR17 91Z	17x7 ET45 ~~4x114.3~~	30	Tires Rims

113 hp · 1.8L QG18DE I4 175/75 R14 84H 5 fitments

GenerationII (N16) 2000–2006

Power113 hp

Engine1.8L QG18DE I4, Petrol

Center bore66.1 mm

PCD4x114.3

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/75 R14 84H	14x5 ET35 ~~4x114.3~~	29	Tires Rims
185/70 R14 87V	14x5.5 ET45 ~~4x114.3~~	29	Tires Rims
185/65 R15 88H	15x6 ET45 ~~4x114.3~~	29	Tires Rims
195/60 R15 88H	15x6 ET45 ~~4x114.3~~	29	Tires Rims
195/55 R16 87V	16x6 ET45 ~~4x114.3~~	29	Tires Rims

109 hp · I4 185/65 R15 88H 5 fitments

GenerationII (N16) 2000–2006

Power109 hp

EngineI4, Diesel

Center bore66.1 mm

PCD4x114.3

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/65 R15 88H	15x6 ET45 ~~4x114.3~~	2	Tires Rims
175/70 R15 86H	15x6 ET45 ~~4x114.3~~	2	Tires Rims
195/60 R15 88H	15x6 ET45 ~~4x114.3~~	2	Tires Rims
195/55 R16 86H	16x7 ET45 ~~4x114.3~~	2.1	Tires Rims
215/45 ZR17 91Z	17x7 ET45 ~~4x114.3~~	30	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.