Skip to content

2009 Nissan Cedric tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2009 Nissan Cedric.

2009 Nissan Cedric tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2009

Open a trim for its factory package and every alternative size, front and rear.

Nissan Cedric VII (Y31)

1987 – 2014 3 trims

Cedric 2.0 (BJY31)

98 hp · V6 Natural 195/70 R14 1 fitment
GenerationVII (Y31) 1987–2014
Power98 hp
EngineV6 Natural, Gas
Center bore66 mm
PCD5x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
195/70 R1414x5.5 ET40 5x114.3–TiresRims

Cedric 2.0 (CBJY31)

98 hp · V6 Natural 195/70 R14 1 fitment
GenerationVII (Y31) 1987–2014
Power98 hp
EngineV6 Natural, Gas
Center bore66 mm
PCD5x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
195/70 R1414x5.5 ET40 5x114.3–TiresRims

Cedric 2.0 (QJY31)

84 hp · I4 Natural 185/80 R14 1 fitment
GenerationVII (Y31) 1987–2014
Power84 hp
EngineI4 Natural, Gas
Center bore66 mm
PCD5x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
185/80 R1414x5.5 ET40 5x114.3–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.