Skip to content
tirewheelguide.com

1974 Nissan Fairlady Z tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1974 Nissan Fairlady Z.

1974 Nissan Fairlady Z tire sizes

195/70RH14195/65RH15205/60RH15
Bolt pattern
Other years
19701971197219731974197519761977 All 1969–2027
Fitment tables

3 trims sold in 1974

Open a trim for its factory package and every alternative size, front and rear.

Nissan Fairlady Z I (S30)

1969 – 1978 3 trims

Fairlady Z 2.0 GS30 (Coupe)

129 hp · 2.0 L L20 I6 Petrol 2.0 L L20 I6 195/70 HR14 5 fitments
GenerationI (S30) 1969–1978
MarketJapan
Power129 hp
Engine2.0 L L20 I6 Petrol 2.0 L L20 I6, Petrol
Center bore73.1 mm
PCD4x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
195/70 HR1414x5 ET15 4x114.3–TiresRims
195/70 HR1414x5.5 ET15 4x114.3–TiresRims
195/70 HR1414x6 ET10 4x114.3–TiresRims
195/65 HR1515x6 ET10 4x114.3–TiresRims
205/60 HR1515x6.5 ET0 4x114.3–TiresRims

Fairlady Z 2.0 S30 (Coupe)

129 hp · 2.0 L L20 I6 Petrol 2.0 L L20 I6 195/70 HR14 5 fitments
GenerationI (S30) 1969–1978
MarketJapan
Power129 hp
Engine2.0 L L20 I6 Petrol 2.0 L L20 I6, Petrol
Center bore73.1 mm
PCD4x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
195/70 HR1414x5 ET15 4x114.3–TiresRims
195/70 HR1414x5.5 ET15 4x114.3–TiresRims
195/70 HR1414x6 ET10 4x114.3–TiresRims
195/65 HR1515x6 ET10 4x114.3–TiresRims
205/60 HR1515x6.5 ET0 4x114.3–TiresRims

Fairlady Z 2.4 HS30 (Coupe)

148 hp · 2.4 L L24 I6 Petrol 2.4 L L24 I6 195/70 HR14 5 fitments
GenerationI (S30) 1969–1978
MarketJapan
Power148 hp
Engine2.4 L L24 I6 Petrol 2.4 L L24 I6, Petrol
Center bore73.1 mm
PCD4x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
195/70 HR1414x5 ET15 4x114.3–TiresRims
195/70 HR1414x5.5 ET15 4x114.3–TiresRims
195/70 HR1414x6 ET10 4x114.3–TiresRims
195/65 HR1515x6 ET10 4x114.3–TiresRims
205/60 HR1515x6.5 ET0 4x114.3–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.

Open the size calculator
Recent articles

Guides worth reading first

All articles
Basics

How to read a tire sidewall

Reading a tire sidewall is easy. Find out what the size, load index, speed rating and date code mean.

Continue reading
Guide

Everything you need to know about tire tread depth

Tire tread depth is an important factor in keeping your vehicle safe — how to measure it and when to replace.

Continue reading
Gear

Best supercapacitor jump starter review

We tested seven supercapacitor jump starters to find the ones worth buying.

Continue reading